21
80-0042-00, Rev. 06.9
LUBRICATION
The Group 42 actuator is designed so that
no field maintenance of the output section
is required. The gear train and bearings are
permanently lubricated and do not require any
relubrication. Field disassembly of the output
section is not recommended. If the rotor is
removed from the motor it will result in a loss
of motor torque that can only be restored by
returning the complete output section to the
factory to be remagnetized.
COMPONENT REPLACEMENT
The table below lists the components of the
Group 42 actuator that are field replaceable. Each
of these components is available as a customer
replacement kit which includes the component(s),
necessary hardware and detailed instructions.
HOW TO ORDER SPARE PARTS
Any customer replacement kit may be purchased
for spare parts. Contact your Beck Sales Engineer
for recommended replacement parts particular to
your application. Parts may be ordered by mail,
telephone, fax or e-mail, with the confirming order
sent to the factory (see back cover for factory
contact information).
CUSTOMER KIT
PART NUMBER
Capacitor Replacement, 6.0Nm 72 RPM Motor, 60Hz
12-8064-10
Capacitor Replacement, 6.0Nm 72 RPM Motor, 50Hz
12-8064-20
Resistor Replacement, 6.0Nm 72 RPM Motor
12-8064-14
Motor (w/ SLM Replacement), 6.0Nm 72 RPM Motor
12-8064-01
SLM Replacement
12-8064-03
Control End Replacement (Option 3 model)
12-8064-65
Control End Replacement (Option 5 model)
12-8064-66
Control End Replacement (Option 7 model)
12-8064-67
Control End Retrofit (Option 3 model
manufactured prior to 01/01/10
)
12-8064-60
Control End Retrofit (Option 5 model
manufactured prior to 01/01/10
)
12-8064-61
Control End Retrofit (Option 7 model
manufactured prior to 01/01/10
)
12-8064-62
Fuse Replacement, Control End (Option 5 & 7 model)
12-8064-12
Feedback Potentiometer Replacement, Control End (Option 5 & 7 model)
12-8064-13
Gasket Replacement
20-3110-19
WARNING
Ignition Hazard—Do not service
in locations made hazardous
(classified) by the presence of
combustible dusts, fibers or
flyings. Service should only be
conducted after power has been
disconnected and the area is known
to be free of ignitable concentrations
o f c o m b u s t i b l e s u b s t a n c e s
(unclassified)
.
MAINTENANCE
