Device Configuration
Interface Setup – Wireless
53
BEC MX-210NPV User Manual
Beacon interval:
The Beacon Interval value indicates the frequency interval of the beacon. Enter a
value between 20 and 1000. A beacon is a packet broadcast by the Router to synchronize the wireless
network.
RTS/CTS Threshold:
The RTS (Request To Send) threshold (number of bytes) for enabling RTS/CTS
handshake. Data with its frame size larger than this value will perform the RTS/CTS handshake.
Enter
a value between 1500 and 2347.
Fragmentation Threshold:
The threshold (number of bytes) for the fragmentation boundary for
directed messages. It is the maximum data fragment size that can be sent. Enter a value between 256
and 2346, even number only.
DTIM Interval:
This value, between 1 and 255, indicates the interval of the Delivery Traffic Indication
Message (DTIM).
TX Power:
The transmission power of the antennas, ranging from 1-100, the higher the more powerful
of the transmission performance.
IGMP Snooping:
Enable or disable the IGMP Snooping function for wireless. Without IGMP snooping,
multicast traffic is treated in the same manner as broadcast traffic - that is, it is forwarded to all ports.
With IGMP snooping, multicast traffic of a group is only forwarded to ports that have members of that
group.”
11n Settings
Channel Bandwidth:
Select
20 MHz, 40 MHz,
or
20/40 MHz
for the channel bandwidth. The wider
the Channel bandwidth the better the performance will be.
Extension Channel (20/40 MHz only):
Select either
Auto
or
Above the control channel
.
Guard Interval:
Select either
800nsec
or
Automatic
for the guard interval. The guard interval is here
to ensure that data transmission do not interfere with each other. It also prevents propagation delays,
echoing and reflections. The shorter the Guard Interval, the better the performance will be. We
recommend users to select
Auto
.
MCS (Modulation and Coding Scheme):
There are options
0~15
and
AUTO
to select from.
AUTO
is recommended.
SSID Settings