BCDVideo BCD221 Скачать руководство пользователя страница 22

Страница: 22 / 157

SAS/SATA drive components and LEDs

Item

Description

Status

Locate

• Solid blue = The drive is being identified by a host

application.

• Flashing blue = The drive carrier firmware is being

updated or requires an update.

Activity ring LED

• Rotating green = Drive activity.
• Off = No drive activity.

Do not remove LED

• Solid white = Do not remove the drive. Removing

the drive causes one or more of the logical drives to
fail.

• Off = Removing the drive does not cause a logical

drive to fail.

Drive status LED

• Solid green = The drive is a member of one or more

logical drives.

• Flashing green = The drive is rebuilding or

performing a RAID migration, strip size migration,
capacity expansion, or logical drive extension, or is
erasing.

• Flashing amber/green = The drive is a member of

one or more logical drives and predicts the drive will
fail.

• Flashing amber = The drive is not configured and

predicts the drive will fail.

• Solid amber = The drive has failed.
• Off = The drive is not configured by a RAID

controller.

SAS/SATA drive components and LEDs

Содержание BCD221






























































































































































Результаты поиска

Содержание BCD221

Отзывы:

BCDVideo BCD221, Руководство пользователя, Страница: 22 / 157

Результаты поиска

Содержание BCD221

Отзывы: