BBS IPS 308 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 166

background image

70

Rollover Extensions – Advanced Topics

Any number of extensions can be con

fi

gured to be a Rollover Extension. These extensions have

special properties. Generally, calls directed to extensions which are busy or do not answer will
be directed to an available Rollover Extension. Typically, extensions connected to a Voice Mail
unit or to an answering machine would be designated as Rollover Extensions though it is possible
to con

fi

gure any extension to be a Rollover Extension. It is also possible to assign an Exclusive

Answering Machine to an extension. When the IPS wants to ring an available Rollover Extension
(due to the conditions listed below), it will

fi

rst check to see if there is an Exclusive Answering

Machine available for the extension.

The IPS will ring an available Rollover Extension or Exclusive Answering Machine when:

• An incoming call has been ringing for greater than a specify amount of time (5 to 60 seconds).

See “Rollover On Standard Incoming Calls Timing”, page 98.

• The MSG button on a key telephone is pressed (if Voice Mail is enabled).
• An intercom call was attempted to an extension which is in the Do Not Disturb mode (if

Rollover on Intercom Calls is set), see “Rollover of Intercom Calls”, page 71.

• An intercom call was attempted to an extension connected to an ordinary phone which is busy

(if Rollover on Intercom Calls is set).

• An intercom call was attempted to an extension connected to a busy key telephone or to any

phone which does not answer within

fi

ve rings (if Rollover on Intercom Calls is set).

• An outside line has been blind transferred to an extension which does not answer or parked at

an extension which does not answer (provided the “Transfer to operator / Rollover Extension”
parameter speci

fi

cs Rollover Extension).

• After the operator is rung and does not answer after a call left on hold for too long rings at the

Operator, see “Rollover On Standard Incoming Calls Timing”, page 98.

When the IPS is looking for a Rollover Extension, it checks the extensions in the order of physical
extension #00 to extension #15 to

fi

nd an extension which is both available and designated to be

a Rollover Extension.

Exclusive Answering Machine Privilege

The Rollover Extensions feature allows you to specify which extension(s) will be rung when a
call is directed to an extension which is busy or does not answer. More than one extension can
be speci

fi

ed as a Rollover Extension so that a multi-channel Voice Mail unit can be attached to

the IPS.

In some installations, it may be desirable to give separate answering machines to certain people to
allow messages intended for them to be stored and retrieved independently. This may now be done
as part of the “Programming the Extensions” command (see “Programming The Extensions”,
page 32).

Rollover Extensions – Advanced Topics

«
...
73
74
75
76
77
...
»

Содержание IPS 308







































































































































































Отзывы:

Нет отзывов

Похожие инструкции для IPS 308

Бренд: Samsung Страницы: 128

Бренд: Samsung Страницы: 33

Бренд: Samsung Страницы: 2

Бренд: Jensen Страницы: 2

Бренд: Safeline Страницы: 20

Бренд: Panasonic Страницы: 98

Бренд: 3Com Страницы: 98

Бренд: S.E.M. Страницы: 6

Бренд: O-SO Pure Страницы: 16

Scalekleen EV9796-01

Бренд: Everpure Страницы: 2

Бренд: Vega Страницы: 60

Бренд: Uniden Страницы: 54

Бренд: Grundig Страницы: 16

Бренд: Topcom Страницы: 96

Бренд: Bogen Страницы: 2

Бренд: invotel Страницы: 2

Бренд: Alto Страницы: 33

Бренд: Ricatech Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды