BBS IPS 308 Скачать руководство пользователя страница 13

Страница: 13 / 166

• Avoid direct sunlight, high humidity or areas of extreme temperatures. The unit is designed to

function properly within a temperature range of 32° - 104° F (0° - 40° C).

• Avoid areas where dust collects, where water or oil may come in contact with the unit, or

where sulfuric gases are produced.

• Avoid areas where vibrations or shocks are expected to occur.

• Install the unit at least

ve feet away from radios, televisions and broadcast antennas.

• Install a ground wire using a good earth ground and connect it to the IPS ground lug.

Wall Mounting Instructions

The unit is designed to be wall-mounted by hanging it on four screws.

1. Position the paper template on the wall, exactly where you want to mount the unit.

2. Mark the four screw “holes” on the wall.

3. Install the screws at the spots marked. Leave 5/16” (8mm) of each screw protruding.

4. On the back of the unit are four keyhole-shaped openings. Hang the unit by

tting the openings

over the screws. Gently slide the unit down.

Installing Your Phone System Unit

Chapter

- Installation Guide

Содержание IPS 308







































































































































































Результаты поиска

Содержание IPS 308

Отзывы:

Похожие инструкции для IPS 308

Бренды по названию

Популярные бренды

BBS IPS 308, Руководство пользователя

Результаты поиска

Содержание IPS 308

Отзывы:

Похожие инструкции для IPS 308

Бренды по названию

Популярные бренды