background image

64

            

1.

 In the programming mode, enter “794”.

 

2.

 Enter the desired 4 digits to specify the hour (“00” to “23”) and the 

minutes (“00” to “59”) at which the system switches into the Night 
mode.

3. 

Enter the digit that speci

fi

 es the weekend day/days during which 

automatic switching into the day mode is enabled.

 

0  Disable switching into Day mode on Friday, Saturday and Sunday.

 

1  Enable Day mode on Sunday only.

 

2  Enable Day mode on Saturday only.

 

3  Enable Day mode on Sunday and Saturday only.

*  4  Enable Day mode on Friday only.
 

5  Enable Day mode on Friday and Sunday.

 

6  Enable Day mode on Friday and Saturday only.

 

7  Enable Day mode on Friday, Saturday and Sunday only.

4.

 Pause for con

fi

 rmation tone.  

 

Hang up or continue programming.

If Automatic Day/Night Switching is enabled, the IPS will automatically determine (upon 
power up or Switching time changes) whether it should be in the Day or Night mode. For proper 
operation, it is necessary that the time speci

fi

 ed for switching into the Day mode must be earlier in 

the day than the time speci

fi

 ed for switching into the Night mode. Otherwise, improper operation 

will result.

If the Operator enters the “56” or “57” command to manually change the operating mode, 
automatic switching will be disabled and must be re-enabled by the System Manager (if desired) 
by entering the “7826” command from the System Manager’s extension.

Automatic Day / Night Mode Switching Times

When the automatic Day/Night switching is enabled, the command to specify the switching times 
are as follows:

794

 Day And Night Modes

Chapter  

3

  

- Functions Of IPS System

Содержание IPS 308







































































































































































Отзывы: