BBS IPS 308, Руководство пользователя

Страница: 37 / 166

32
Programming The Extensions
The con fi guration settings for each extension must be programmed separately. The programming
procedure is simple if you take it step-by-step. First, decide on the codes you want to enter for
each extension. Write the code for each of your choices in the table provided on page 34. Then
program one extension at a time. You must complete all steps for each extension before starting
on the next one. The “*” mark indicates the default value of each setting.
75
1.
In the programming mode, enter “75”.
2.
Enter the 2-digit extension number (“00” to “15”).
3.
Enter the code for the phone type and features:
0 ordinary phone (with no special features)
* 1 ordinary phone + enable call hold retrieval
2 key
telephone
3 key tel enable call hold retrieval
4 ordinary phone + rollover extension
5 ordinary phone + rollover ext enable call hold retrieval
6 key tel rollover extension
7 key tel rollover ext enable call hold retrieval
4.
Enter the code for other features:
0 no additional features
* 1 enable call transfer / hold
2 enable call break-in
3 enable call transfer / hold + call break-in
4 enable emergency alarm
5 enable call transfer / hold + emergency alarm
6 enable call break-in + emergency alarm
7 enable call transfer / hold + call break-in + emergency alarm
Confi guring The Extensions
Chapter 3 - Functions Of IPS System