manualshive.com logo in svg

BayTech MMP, Руководство пользователя

Поделиться
Скачать
BayTech MMP Скачать руководство пользователя страница 24

 

Page

24 

STATUS

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Ostatus

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

This shows the current status 
of all circuit to the circuit 
breaker level. It shows Circuit 
Groups, True RMS Current, 
Peak RMS Current, True RMS 
Voltage, Average Power, and 
Volt-Amps. Status also shows 
whether the outlets are on, off, 
or locked. 

NOTE:

 Each 

module draws about 4VA with 
nothing plugged in to the 
module outlets, due to the 
sensors on the module. 

MMP-14>Ostatus 
------------------------------------------------------------------------------- 
|     Outlet       |True RMS|Peak RMS|True RMS |Average | Volt-  |   Outlet   | 
|      Name        | Current| Current| Voltage | Power  | Amps   |   State    | 
------------------------------------------------------------------------------- 
| CKT 1 Outlet 1   |  0.0 A |  0.2 A | 116.7 V |    0 W |   4 VA | On         | 
| CKT 1 Outlet 2   |  0.0 A |  0.2 A | 116.7 V |    0 W |   4 VA | On         | 
| CKT 1 Outlet 3   |  0.0 A |  0.0 A | 116.7 V |    0 W |   4 VA | On         | 
| CKT 1 Outlet 4   |  0.0 A |  0.1 A | 116.7 V |    0 W |   4 VA | On         | 
| CKT 1 Outlet 5   |  0.0 A |  0.1 A | 116.7 V |    0 W |   4 VA | On         | 
| CKT 2 Outlet 1   |  0.1 A |  0.1 A | 117.8 V |    0 W |  19 VA | On         | 
| CKT 2 Outlet 2   |  0.0 A |  0.1 A | 117.8 V |    0 W |   4 VA | On         | 
| CKT 2 Outlet 3   |  0.1 A |  0.1 A | 117.8 V |    0 W |  19 VA | On         | 
| CKT 2 Outlet 4   |  0.1 A |  0.1 A | 117.8 V |    0 W |  19 VA | On         | 
| CKT 2 Outlet 5   |  0.0 A |  0.1 A | 117.8 V |    0 W |   4 VA | On         | 
| CKT 3 Outlet 1   |  0.0 A |  0.2 A | 116.1 V |    0 W |   4 VA | On         | 
| CKT 3 Outlet 2   |  0.0 A |  0.2 A | 116.1 V |    0 W |   4 VA | On         | 
| CKT 3 Outlet 3   |  0.0 A |  0.2 A | 116.1 V |    0 W |   4 VA | On         | 
| CKT 3 Outlet 4   |  0.0 A |  0.2 A | 116.1 V |    0 W |   4 VA | On         | 
| CKT 3 Outlet 5   |  0.0 A |  0.2 A | 116.1 V |    0 W |   4 VA | On         | 
| CKT 4 Outlet 1   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 4 Outlet 2   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 4 Outlet 3   |  0.1 A |  0.2 A | 118.0 V |    0 W |  19 VA | On         | 
| CKT 4 Outlet 4   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 4 Outlet 5   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 5 Outlet 1   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 5 Outlet 2   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 5 Outlet 3   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 5 Outlet 4   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 5 Outlet 5   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 6 Outlet 1   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 6 Outlet 2   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 6 Outlet 3   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 6 Outlet 4   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
| CKT 6 Outlet 5   |  0.0 A |  0.2 A | 118.0 V |    0 W |   4 VA | On         | 
-------------------------------------------------------------------------------

Ostatus 

shows Outlet names 

by Circuit number and outlet 
number, True RMS Current, 
Peak RMS Current, True RMS 
Voltage, Average Power, Volt-
Amps and Outlet State. 

IMPORTANT:

 This 

option is available 

ONLY

 

if the Cascade feature has 
been enabled. 

Unit ID: MMP-27    56CE1
 
Total kW-h:    0 
------------------------------------------ 
|    Circuit     | True RMS  | Peak RMS  | 
|    Breaker     |  Current  |  Current  | 
------------------------------------------ 
|      CKT1      |  0.0 Amps |  0.0 Amps | 
|      CKT2      |  0.0 Amps |  0.0 Amps | 
------------------------------------------------------------------------------- 
|    Circuit     | True RMS  | Peak RMS  |  True RMS   |   Average  |  Volt-  | 
|     Group      |  Current  |  Current  |   Voltage   |    Power   |  Amps   | 
------------------------------------------------------------------------------- 
|   Circuit M1   |  0.0 Amps |  0.0 Amps | 199.4 Volts |    0 Watts |    4 VA | 
|   Circuit M2   |  0.0 Amps |  0.0 Amps | 201.9 Volts |    0 Watts |    4 VA | 
|   Circuit M3   |  0.0 Amps |  0.0 Amps | 201.3 Volts |    0 Watts |    4 VA | 
|   Circuit M4   |  0.0 Amps |  0.0 Amps | 200.6 Volts |    0 Watts |    4 VA | 
|   Circuit M5   |  0.0 Amps |  0.0 Amps | 200.0 Volts |    0 Watts |    4 VA | 
|   Circuit M6   |  0.0 Amps |  0.0 Amps | 200.9 Volts |    0 Watts |    4 VA | 
------------------------------------------------------------------------------- 
 
Int. Temp: 110.3 F  Ext. 1:  69.9 F  Ext. 2:  73.6 F : 38.8% RH 
 1)...MOD 1 Outlet 1  : On            2)...MOD 1 Outlet 2  : On 
 3)...MOD 1 Outlet 3  : On            4)...MOD 1 Outlet 4  : On 
 5)...MOD 2 Outlet 1  : On            6)...MOD 2 Outlet 2  : On 
 7)...MOD 2 Outlet 3  : On            8)...MOD 2 Outlet 4  : On 
 9)...MOD 3 Outlet 1  : On           10)...MOD 3 Outlet 2  : On 

Содержание MMP





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды