37
Maintenance
User Manual PoolManager
®
71
PoolManager
®
Bromine only
•
Install the tapping saddles for water extraction
and return for the brominator according to the
diagram
•
Connect the brominator with the magnet valve
and circulation system as shown in the diagram.
•
Connect the measurement water extraction with PoolManager
®
pre-filter using a piece of measurement water hose that is
sufficiently long.
•
Connect the measuring cell's outlet with measurement water
return using a piece of measurement water hose that is sufficiently
long. Measurement water can also be fed back to the surge water
container, if present.
•
Connect the pressure line (hose) provided for pH with the
pressure side (right connection) of the right hose pump. Connect
the other end with the injector on the circulation line.
PoolManager
®
Chlorine and Oxygen only
Connect the pressure line provided for ChloriLiquid or
BayroSoft with the pressure side (right connection) of
the hose pump for disinfection. Connect the other end
with the injector on the circulation line.
•
Connect the suction lance's hose for pH with the suction side (left
connection) of the dosage pump for pH.
•
Plug the suction lance's plug into the respective socket on the unit
(see imprint on the unit).
PoolManager
®
Chlorine and Oxygen only
•
Connect the suction lance's hose for ChloriLiquid
or BayroSoft with the suction side (left connection)
of the dosage pump for disinfection.
•
Plug the suction lance's plug into the respective
socket on the unit (see imprint on the unit).
•
Open the package with the liquid water maintenance products and
insert the suction lances vertically down to the floor.
IMPORTANT NOTICE
Place the packaging for liquid water maintenance
products (pH-/pH+, ChloriLiquid, BayroSoft) into
appropriate containers.
36.5.2
Configuration water flow
Use the black adjustment screw to the left of the measuring cell only
for making fine adjustments to flow rate. Larger changes can be made
using the tap on the measurement water extraction.
PoolManager
®
Chlorine, Bromine, and Oxygen only
Configure water flow through the cell such that there is
ca. 1-2 mm of clearance between the float and the top
edge of the proximity switch.
PoolManager
®
PRO only
Configure water flow through the measuring cell such
that the cleaning balls sufficiently and evenly rotate on
the gold plate. Avoid too much flow, which can be
recognised when the cleaning balls hop.
Bubble formation in the measuring cell:
Should you find bubbles are forming in the measuring cell, then
inspect the measurement water circuit for leakage.
If the measurement water circuit is sealed tightly yet there are still
bubbles forming, then please open up the black adjustment screw on
the left side of the measuring cell further and choke measurement
water using the tap on the measurement water extraction. Small
adjustments are made using the black adjustment screw.
37
Maintenance
IMPORTANT NOTICE
Use only replacement parts and sensors from the
manufacturer. Otherwise, the warranty will be
forfeited.
Some PoolManager
®
parts are subject to abrasion due to chemical
and mechanical strain. Therefore, regular control is necessary for safe,
long-term operation. Regular precautionary maintenance of the system
protects against unplanned operating interruptions.
37.1
Monthly maintenance
•
Visual inspection of all dosage lines and hoses
•
Check filter screen, clean as needed
•
Check water values using the test kit provided, adjust electrode
settings and calibration as necessary
37.2
Quarterly maintenance
•
Visual inspection of all dosage lines and hoses
•
Check screen, clean as needed
•
Check water values using the test kit provided, adjust settings and
calibration as necessary
•
Calibration of pH and redox electrodes using the buffer solutions
provided
•
Calibration of chlorine electrodes (PoolManager
®
PRO only)
•
Maintenance of injection points
37.3
Annual maintenance
•
Visual inspection of all dosage lines and hoses
•
Check screen, clean as needed
•
Check water values using the test kit provided, adjust settings and
calibration as necessary
•
Replace pH and redox electrodes and calibrate using fresh buffer
solutions
•
Replace the chlorine measuring cell's glass electrode and
calibrate the chlorine measurement cell (PoolManager
®
PRO only)
•
Maintenance of injection points
•
Replace the hoses on the dosage pumps
PoolManager
®
PRO only
The lifespan of the gold electrodes in the chlorine
measuring cell is ca. 5 years. Depending on the
degree of utilisation, it may be necessary to replace a
gold electrode earlier.