8
Display and operation - Graphical user interface
User Manual PoolManager
®
17
8.2.2.1
Entry screen
There is one uniform entry screen for all numerical parameters, in
which values can be configured.
1
Parameter name
2
Display of current (entry) value
3
Number block for entering the value
4
Minimum potential setting
5
Maximum potential setting
6
Button for resetting to the default value
7
Cancel will close the entry screen.
The value will remain unchanged.
8
OK will apply the configured value and save it
permanently.
Incremental increase and/or decrease of the configured
value.
The increment is set to be sensible for each parameter.
Delete the last character
Delete the entire value
8.2.3
Selection parameters
For selection parameters, one of multiple settings can be selected,
such as active or inactive. The selection can be configured
(configuration parameters). However, there are also selection
parameters that can only be displayed, but not configured, such as
system statuses
1
2
1
Parameter name (button)
Calls up the parameter's help text
2
Parameter value (button or text field)
If the parameter is configurable, then the parameter value will
be shown as a button. That will call up an entry screen in
which the value can be configured.
8.2.3.1
Entry screen
There is one uniform entry screen for all selection parameters and with
which values can be configured.
1
Display of all selection options.
Tap on the desired setting to activate it.
2
Button for resetting to the default value
3
Cancel will close the entry screen.
The value will remain unchanged.
4
OK will apply the configured value and save it
permanently.
There are also selection parameters for which multiple selections are
possible; such as multiple weekdays on which a certain process
should be launched.
In this case, each selection option can be activated and deactivated by
tapping on it.
For several selection parameters, a symbol is shown for each
selection option in addition to the text, such as a flag to select the
menu language.