![background image](http://html1.mh-extra.com/html/bayrol/poolmanager-bromine/poolmanager-bromine_user-manual_2713057077.webp)
42
Changing the maintenance program
41.2.3
Configuration
After connecting one or multiple membrane dosing pumps, correct
triggering has to be activated and configured in PoolManager
You'll find all relevant setting in the menu
Service functions
Configuration dosing
Selecting the pump type
Membrane pump
will activate the triggering of
individual dosing strokes via PoolManager
®
.
The default setting for pump type is
Standard.
intended for conventional peristaltic pumps.
Menu
Configuration dosage pumps
Pump type
pH / mV (Cl) / Cl
For membrane pumps, select
Max. no. of strokes
pH / mV (Cl) / Cl
Enter the desired maximum number of strokes
[strokes/min] at a dosing output of 100%.
For more information, also review the section
Determining output
Pump rate
pH / mV (Cl) / Cl
Enter the correct maximum dosing output for the
corresponding dosing pump in [l/h]
(for the maximum number of strokes
IMPORTANT NOTICE!
Incorrect configuration of dosing output
If a pump's dosing output is not configured correctly,
then the following problems will arise:
•
The calculation for duration of manual dosing is not
correct.
•
The configuration assistant
parameters calculates erroneous settings.
INFO
Membrane dosage pump for O2 (BayroSoft)
For O2 dosing (BayroSoft), the pump type
Membrane pump
cannot be selected. For BayroSoft
dosing, however, a membrane pump can be triggered
with simple turning on and off, like a peristaltic pump.
The output desired can be configured directly on the
pump.
This variation is sufficient, as PoolManager
doses either 100% or not at all. Therefore, variable
triggering of individual pump stro
41.2.3.1
Determining output
The maximum number of strokes per minutes must be configured such
that the desired maximum output in l/h is yielded at 100% dosing
output.
Output can be determined for certain stroke rates with the data sheet
for the pump being used, such as for 60 strokes/min, 120 strokes/min,
or 180 strokes for min.
For many pumps, stroke length can also be configured using a
controller on the pump. This also makes it possible to adjust the
pump's output to match needs.
Example:
A maximum pump output of 2.0 l/h is planned for a system. The
maximum stroke frequency on the pump is 180 strokes/min.
Using the pump's data sheet, the desired output of 2.0 l/h is yielded
with maximum stroke length (100%) and a stroke frequency of 40%,
i.e. 72 stokes/min.
Therefore, the maximum number of strokes must be set to 72/min in
PoolManager
®
in this case. Then PoolManager
dosing pulses per minuted at maximum dosing output (100%). This will
lead to the desired maximum dosing output of 2.0 l/h.
User Manual PoolManager
®
After connecting one or multiple membrane dosing pumps, correct
and configured in PoolManager
®
menu.
Configuration dosing pumps
will activate the triggering of
This operating mode is
For membrane pumps, select
Membrane pump.
Enter the desired maximum number of strokes
[strokes/min] at a dosing output of 100%.
For more information, also review the section
Enter the correct maximum dosing output for the
dosing pump in [l/h]
(for the maximum number of strokes entered)
Incorrect configuration of dosing output
If a pump's dosing output is not configured correctly,
then the following problems will arise:
The calculation for duration of manual dosing is not
for configuring control
parameters calculates erroneous settings.
Membrane dosage pump for O2 (BayroSoft)
For O2 dosing (BayroSoft), the pump type
cannot be selected. For BayroSoft
dosing, however, a membrane pump can be triggered
with simple turning on and off, like a peristaltic pump.
The output desired can be configured directly on the
This variation is sufficient, as PoolManager
®
always
doses either 100% or not at all. Therefore, variable
triggering of individual pump strokes is not necessary.
The maximum number of strokes per minutes must be configured such
that the desired maximum output in l/h is yielded at 100% dosing
Output can be determined for certain stroke rates with the data sheet
the pump being used, such as for 60 strokes/min, 120 strokes/min,
For many pumps, stroke length can also be configured using a
controller on the pump. This also makes it possible to adjust the
A maximum pump output of 2.0 l/h is planned for a system. The
maximum stroke frequency on the pump is 180 strokes/min.
Using the pump's data sheet, the desired output of 2.0 l/h is yielded
with maximum stroke length (100%) and a stroke frequency of 40%,
Therefore, the maximum number of strokes must be set to 72/min in
in this case. Then PoolManager
®
will generate 72
dosing pulses per minuted at maximum dosing output (100%). This will
of 2.0 l/h.
42
Changing the maintenance program
The maintenance program (oxygen (02 / BayroSoft) / Chlorine (Cl) /
Bromine (Br)) is changed in the menu
Menu hotkey
Service functions
Enhanced functions
Configuration care method
The new program that is desired and a matching code number has to
be entered for each. The code number depends on the previous
maintenance program
and
on the new maintenance program selected:
Current program
New program
PoolManager
®
O2
PoolManager
PoolManager
®
O2
PoolManager
PoolManager
®
Cl
PoolManager
PoolManager
®
Cl
PoolManager
PoolManager
®
Br
PoolManager
PoolManager
®
Br
PoolManager
77
Changing the maintenance program
The maintenance program (oxygen (02 / BayroSoft) / Chlorine (Cl) /
Bromine (Br)) is changed in the menu
care method
The new program that is desired and a matching code number has to
be entered for each. The code number depends on the previous
on the new maintenance program selected:
New program
Code number
PoolManager
®
Cl
122
PoolManager
®
Br
123
PoolManager
®
O2
221
PoolManager
®
Br
223
PoolManager
®
O2
321
PoolManager
®
Cl
322