Bayrol PoolManager Bromine, Руководство пользователя, Страница: 66 / 95

30
Eco mode (energy saving mode)
INFO
Allocation of relay switch output
or power output
Salt electrolysis control can only be activated if
have allocated a relay switch output or a power output
to it beforehand, depending on operating mode.
INFO
Pulse interval dependency
on dosing output
When using control impulses, the interval between two
sequential pulses varies depending on the
dosing output. At 100% dosing output, the interval will
correspond to the operating cycle entered. For lower
dosing outputs, the interval is expanded accordingly;
e.g. for 50% dosing output, the interval is doubled.
INFO
Current
dependency
on dosing output
When controling via a power output 0/4
current emitted is interpolated between the minimum
and maximum values indicated based on the current
dosing output.
INFO
Plug-in module PM5-SA4 needed
To control the salt electrolysis sys
output 0/4-20mA, the following optional plug
is needed:
PM5-SA4 CONVERTER 0/4-20MA (Art. no. 127011)
29.2 Electrical connection
Requisite user qualification:
ELECTRICAL SPECIALIST
Electrical connection of the solar control system may
only be performed by an ELECTRICAL SPECIALIST as
defined in the chapter
User qualification.
IMPORTANT NOTICE!
Observe maximum flows
Observe the maximum permissible currents for each
individual relay switch output (max. 4A) and for the sum
of all relay switch outputs being used in 230V~ (in sum,
max. 4A)
Please also refer to the Chapter
For the operating mode Control pulses , a relay switch output is
operated as a potential free switch and is linked with the salt
electrolysis system's corresponding control input. Please use the
corresponding connection diagram in the section
outputs Connection options Connecting a device with the
potential free control input .
For the operating mode Power output 0/4-20mA
optional plug-in module PM5-SA4 is connected with the corresponding
salt electrolysis system power input. For more details, please refer to
the separate documentation for the power outputs
30 Eco mode (energy saving mode)
The function eco mode (energy saving mode) facilitates automatic,
timed toggling of the pool from normal mode into an energy
operating mode. The two operating modes are designated as follows:
•
Normal mode (normal pool operation)
User Manual PoolManager ®
Allocation of relay switch output
Salt electrolysis control can only be activated if you
have allocated a relay switch output or a power output
to it beforehand, depending on operating mode.
impulses, the interval between two
sequential pulses varies depending on the current
dosing output. At 100% dosing output, the interval will
correspond to the operating cycle entered. For lower
dosing outputs, the interval is expanded accordingly;
e.g. for 50% dosing output, the interval is doubled.
Current dependency
ing via a power output 0/4-20mA, the
current emitted is interpolated between the minimum
and maximum values indicated based on the current
SA4 needed
the salt electrolysis system via a power
20mA, the following optional plug-in module
20MA (Art. no. 127011)
Electrical connection of the solar control system may
only be performed by an ELECTRICAL SPECIALIST as
User qualification.
Observe the maximum permissible currents for each
switch output (max. 4A) and for the sum
of all relay switch outputs being used in 230V~ (in sum,
Please also refer to the Chapter 230V~ Power supply.
, a relay switch output is
witch and is linked with the salt
electrolysis system's corresponding control input. Please use the
corresponding connection diagram in the section
Universal switch
Connecting a device with the
20mA , a power outlet on the
SA4 is connected with the corresponding
salt electrolysis system power input. For more details, please refer to
the separate documentation for the power outputs 0/4-20mA.
Eco mode (energy saving mode)
The function eco mode (energy saving mode) facilitates automatic,
timed toggling of the pool from normal mode into an energy-saving
operating mode. The two operating modes are designated as follows:
•
Eco mode (energy-saving operation)
Actual execution of the two operating modes can be realised in a very
flexible manner.
Example (for polls with over overflow gutter):
•
Normal mode Circulation via the overflow gutter
•
Eco mode Circulation via the floor drain
(reduction of thermal loss)
•
Toggling the water circuits for both operating modes can be
realised with, for example, stem valves.
The function eco mode provides the following options:
•
Multiple flexibly programmable timers
•
Flexible allocation of relay switch outputs for the two operating
modes
•
Operation of relay switch outputs optionally as potential free
switch or as 230V~-output
•
Link with an external switch or
operating mode
The two relay outputs for this function are connected as follows for the
respective operating mode:
Operating mode Status of the allocated relay switch outputs
(Normal operation) Relay output 'normal mode'
Rely output 'eco mode'
Eco mode
(Energy saving mode) Relay output 'normal mode'
Rely output 'eco mode'
30.1 Menu Eco mode
The configuration menu for Eco mode
icon:
Eco mode
The following settings are available:
Menu Eco mode
Operating mode •
Inactive (Eco mode not used)
•
Normal mode
•
Eco mode
•
Time switch
(Automatically timed toggling between operating
modes)
Programmable timer
Programming timers.
Basic configuration
Basic settings for solar control.
Safety settings
Safety settings for solar control.
INFO
Allocation of a relay switch output
Eco mode can only be activated if you have allocated a
relay switch output to it beforehand.
30.1.1 Programmable timer
This menu provides 6 programmable time intervals
Eco mode is activated during the programmed
activated outside of the programmed times.
Programming here is identical to programming the timers for the
universal switch outputs, see
Programmable timer.
66
saving operation)
Actual execution of the two operating modes can be realised in a very
Example (for polls with over overflow gutter):
Circulation via the overflow gutter
Circulation via the floor drain
Toggling the water circuits for both operating modes can be
realised with, for example, stem valves.
The function eco mode provides the following options:
Multiple flexibly programmable timers
exible allocation of relay switch outputs for the two operating
Operation of relay switch outputs optionally as potential free
Link with an external switch or push button for toggling the
for this function are connected as follows for the
Status of the allocated relay switch outputs
Relay output 'normal mode' On
Rely output 'eco mode' Off
output 'normal mode' Off
Rely output 'eco mode' On
Eco mode is called up with the following
The following settings are available:
Inactive (Eco mode not used)
(Automatically timed toggling between operating
Allocation of a relay switch output
Eco mode can only be activated if you have allocated a
relay switch output to it beforehand.
rogrammable timer
This menu provides 6 programmable time intervals for eco mode.
Eco mode is activated during the programmed times; normal mode is
activated outside of the programmed times.
Programming here is identical to programming the timers for the
universal switch outputs, see
Universal switch outputs,