29
7638897 - v0
2
- 14032016
6 Installation
6.1 General
Note
Pursuant to Article L. 113-3 of the French Consumer Code,
the installation of this equipment must be done by a certified
operator whenever a refrigerant connection is necessary (the
case with split systems, even when fitted
with a quick coupling device).
6.2 Preparation
6.2.1 Thermodynamic water heater installation
Fig.12 Installation
NIE-B-007
1
Unbolt the water heater from its pallet.
2
Level the water heater using metal blocks under the feet of the water
heater if necessary.
Caution
Do not place the blocks on the external sides of the water
heater.
Note
In order to easily drain condensates from the appliance, install
it on a horizontal floor. If this is not the case, the drain opening
must be located at the lowest point. The angle of incline must
not exceed 2°.
6 Installation
