Baumuller AIO Series страница 7 Скачать руководство пользователя | Manualshive

Страница: 7 / 84

background image

General

Instruction handbook

b maXX

(BM4-F-)AIO-XX (Analog IO module)

Document No.: 5.01045.08

7

1

1.3

Limitation of liability

All specifications and notes in these instruction handbook were compiled taking into ac-
count the applicable standards and regulations, the state of the art and our knowledge
and experience of many years.

The manufacturer assumes no liability for damages due to:

m

noncompliance with the instruction handbook

m

usage for other than the intended purpose

m

usage by untrained personnel

The actual scope of delivery can vary in case of optional equipment, laying claim to addi-
tional order options, or on account of the latest technical changes to the explanations and
representations described herein.

The user bears the responsibility for performing service and initial operation in accor-
dance with the safety regulations of the applicable standards and all other relevant gov-
ernmental or local regulations concerning the dimensioning and protection of conductors,
grounding, disconnectors, overcurrent protection, etc.

The person who carried out the mounting or installation is liable for any damage incurred
when assembling or connecting the device.

1.4

Copyright protection

The instruction handbook must be treated confidentially. It is to be used exclusively by
personnel who work with the device. The consignment of the instruction handbook to third
persons without the written permission of the manufacturer is prohibited.

NOTE!

The specific contents, text, drawings, images and other representations are copy-
righted and subject to industrial property rights. Any prohibited usage is punishable
by law.

CANopen

®

is a registered trademark of CAN in Automation e.V

EnDat

®

is a registered trademark of Dr. Johannes Heidenhain GmbH,

83301 Traunreut, Germany

EtherCAT

®

is a registered trademark of Beckhoff Automation GmbH,

33415 Verl, Germany

Hiperface

®

SinCos

®

is a registered trademark of SICK STEGMANN GmbH,
78166 Donaueschingen, Germany

NOTE!

Please note, that BAUMÜLLER is not responsible to examine whether any (industrial
property) rights of third parties are infringed by the application-specific use of the
BAUMÜLLER products/components or the execution.

«
...
5
6
7
8
9
...
»

Содержание AIO Series





















































































Отзывы:

Нет отзывов

Похожие инструкции для AIO Series

Smart-MPPT Li Series

Бренд: Y-Solar Страницы: 6

Бренд: Jedia Страницы: 12

Бренд: JED Micro Страницы: 10

Бренд: JCM Technologies Страницы: 2

Бренд: V2 Страницы: 12

NORA-W10 Series

Бренд: u-blox Страницы: 56

Бренд: z21 Страницы: 2

1E0671-1 MCR2.9

Бренд: Haberl Electronic Страницы: 9

Бренд: J+J Страницы: 2

traxon e:cue LCE-mx

Бренд: Osram Страницы: 35

Бренд: FEAS Страницы: 4

Бренд: WAGNER Страницы: 128

Бренд: Roger Страницы: 21

Clip Studio TABMATE

Бренд: CELSYS Страницы: 2

MIMIC HRNDWHEELS

Бренд: MRMC Страницы: 20

Бренд: Sunlover Страницы: 2

BLEUBOX R-IN-UHF-5239U

Бренд: iDTRONIC Страницы: 13

Бренд: Konig Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды