Baumuller AIO Series страница 8 Скачать руководство пользователя | Manualshive

Страница: 8 / 84

background image

Other applicable documents

Instruction handbook

b maXX

(BM4-F-)AIO-XX (Analog IO module)

Document No.: 5.01045.08

Baumüller Nürnberg GmbH

8

1.5

1.5

Other applicable documents

Components of other manufacturers are integrated into the device. For these purchased
parts, hazard assessments have been performed by the respective manufacturers. The
compliance of the design construction with the applicable European and national regula-
tions has been declared for the components by the respective manufacturers.

1.6

Spare parts

Procure spare parts through an authorized dealer or directly from the manufacturer.

1.7

Disposal

Insofar as no take-back or disposal agreement has been made, please disassemble units
correctly and properly recycle the constituent parts.

See also

b maXX 4000

5.12008, chapter Disposal.

1.8

Guarantee provisions

The guarantee provisions are stated in a separate document of the sales documents.

The devices described herein may only be operated in accordance with the stipulated
methods, procedures and conditions. Anything else not presented here, including the op-
eration of devices in mounted positions, is not permitted and must be cleared with the
plant on a case-by-case basis. If the devices are operated in any other manner than as
described within this Instruction handbook, then all guarantee and warranty rights are ren-
dered null and void.

1.9

Customer service

Our customer service is available to provide you with technical information.

Info on the responsible contact persons is available at all times via telephone, fax, mail or
the Internet.

WARNING!

False or flawed spare parts can lead to damage, malfunction or complete fail-
ure, thus endangering safety.

Therefore:

m

Only use original spare parts of the manufacturer.

«
...
6
7
8
9
10
...
»

Содержание AIO Series





















































































Отзывы:

Нет отзывов

Похожие инструкции для AIO Series

Бренд: Hansen Страницы: 4

Бренд: Waters Страницы: 55

Бренд: Paradox Страницы: 2

Бренд: Samsung Страницы: 32

Бренд: Hanna Instruments Страницы: 54

Бренд: Hanna Instruments Страницы: 2

Бренд: Harpo Страницы: 35

Бренд: Hardi Страницы: 2

Tissue-Tek TEC 6

Бренд: Sakura Seiki Страницы: 6

Бренд: Dantherm Страницы: 20

Бренд: PESA Страницы: 30

Бренд: Parker Страницы: 8

Бренд: Global Fire Equipment Страницы: 23

Бренд: KSB Страницы: 16

Бренд: Grundfos Страницы: 20

Бренд: Objective Imaging Страницы: 11

TITAN-TRACKSIDE-3

Бренд: Remote Control Systems Страницы: 4

Бренд: LAUNDRY SOLUTION Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды