Baumuller AIO Series страница 31 Скачать руководство пользователя

Страница: 31 / 84

of 82

Instruction handbook

b maXX

(BM4-F-)AIO-XX (Analog IO module)

Document No.: 5.01045.08

RANSPORT

AND

ACKAGING

5.1

What to observe when transporting

For initial transport the

BM4-F-AIO-XX

for standard controller is packed at the manufac-

turer. If the device is to be further transported, ensure that the following conditions are
met throughout the entire transport:

Climate class 2 K 3 as per EN 60721-3-2

Temperature range - 30 °C up to + 70 °C

Vibration, shock, continuous shock class 2 M 1 as in EN 60721-3-2

5.2

Transport inspection

Upon receiving the delivered goods, immediately examine them for completeness and
transport damage.

If there is outwardly visible transport damage, proceed as follows:

Do not accept the delivery or conditionally accept it with reservations.

Note the extent of the damage on the transport documents or on the delivery note of
the transport agent.

Immediately file a complaint with the freight carrier. Have the complaint confirmed in
writing and immediately contact the responsible representative of Baumüller Nürnberg
GmbH.

NOTE!

The device may not be operated if there is visible transport damage!

Содержание AIO Series





















































































Результаты поиска

Содержание AIO Series

Отзывы:

Похожие инструкции для AIO Series

Бренды по названию

Популярные бренды

Baumuller AIO Series, Инструкция по эксплуатации

Результаты поиска

Содержание AIO Series

Отзывы:

Похожие инструкции для AIO Series

Бренды по названию

Популярные бренды