Baumuller AIO Series Скачать руководство пользователя страница 22

Страница: 22 / 84

Function

Instruction handbook

b maXX

(BM4-F-)AIO-XX (Analog IO module)

Document No.: 5.01045.08

Baumüller Nürnberg GmbH

of 82

4.1

Function

The

Analog IO module

converts analog input signals in digital signals for control (e.g set

value generation) and/or makes available converted analog values (e. g. for RPM dis-
play) from internally processed digital signals.

Technical data of the

Analog IO module

can be found in

Standard

controller

with plug-in slots to enlarge the controller functionality with function and option modules,
e.g. encoder modules, analog inputs/outputs or field bus connections.

ES controller

with not exchangeable function and option modules.

The Analog IO module is available as plug-in module

BM4-F-AIO-XX

for standard con-

troller and as

AIO-XX

built in the ES controller.

NOTE!

The operation with ProDrive is described, only. Please contact Baumüller Nürnberg
GmbH or visit out website

www.baumueller.de

for download, if the software is not

available.

NOTICE!

Plug-in module, which has not been manufactured from Baumüller Nürnberg
GmbH.

Modules of other manufacturers can damage/destroy the device.

Only use BM4-F-XXX- and BM4-O-XXX-plug-in modules.

Содержание AIO Series





















































































Результаты поиска

Содержание AIO Series

Отзывы:

Бренды по названию

Популярные бренды

Baumuller AIO Series, Инструкция по эксплуатации

Результаты поиска

Содержание AIO Series

Отзывы:

Бренды по названию

Популярные бренды