- 38 -
remove the feed chute tray from the feed chute,
detach the lid from the adapter ring and remove it,
carefully take out the sieve from the juice bowl,
remove the adapter ring from the juice bowl,
remove the juice bowl from the motor base.
o
Wash thoroughly the juice bowl, adapter ring, lid, feed chute tray, pulp container and
plunger under running water with a mild cleaning agent. Next, rinse with clean water.
o
Place the sieve under running water and clean the outside of the sieve using the
appropriate plastic brush. Next, clean the inside of the sieve by brushing it counter
clockwise to remove the pulp.
Tip:
if the fruit pulp sticks to the sieve or dried out, soak the sieve in the hot water
for 5 to 10 minutes.
o
To ensure that all pulp that could block the sieve have been removed, examine the
sieve under a light source.
WARNING! Danger of injury!
The knives in the sieve are very sharp.
To avoid injury, do not touch them with bare hands.
o
Before reassembly, carefully wipe down all the cleaned parts or leave them to dry
thoroughly.
CAUTION!
Never immerse the motor base in running water or any other liquids,
do not wash it under running water or in the dishwasher.
o
Wipe the motor base and power cable with a soft, moist cloth. Make sure that no
liquids get inside the motor housing or inside the plug. Wipe dry the device
thoroughly with a soft, dry cloth.
o
Do not use any harsh cleaning agents, abrasive cleaners, acetone, alcohol, etc.,
as they may damage the surface of the device.
Storage
o
If the device is not used for any lengthy period, clean it according to the
aforementioned description and store it in dry, clean place protected against
cold, sun and children. Do not place any have objects on the device.
