- 31 -
Control elements
5. Installation and operation
5.1 Assembly
Unpack the device and remove the packaging materials.
CAUTION!
Do not remove the identification plate or the warning signs from the device.
Before use, clean the device according to the guidance in point
6 ”Cleaning“
.
Assemble the device according to
the drawing
on
page 30
and the description
below.
➊
➋
Place the motor base (
3
) on a dry,
flat surface and ensure easy access
to the control elements (
9
).
Press the motor base (
3
) towards the
surface until the base rubber feet (
7
)
cling tightly to the surface.
Place the juice bowl (
14
) onto the motor
base (
3
) and position the juice extraction
nozzle with the closure (
13
) above the
groove in the base (
7
).
ON switch (green)
OFF switch (red)
