- 29 -
4. Technical data
4.1 Technical specification
Name
Juice extractor
”Bartscher PRO”
Code-No.
150137
Body material:
Stainless steel, plastic
Construction:
XXL feed chute,
Ø
83 mm
Rotation / min: max 3.000
Micro perforated stainless steel sieve
for perfect taste of fruit
Capacity of pulp container: 7 litres
Safety switch
Thermal motor safety
Power:
0.7 kW / 220-240 V 50/60 Hz
Dimensions:
W 260 x D 430 x H 530 mm
Weight:
12.8 kg
We reserve the right to make technical changes!
4.2 About the juice extractor
With the electric
juice extractor
”Bartscher PRO“
you can professionally produce juice
from fruits and vegetables.
The lid with the integrated, very lagged
XXL feed chute
with a diameter of 83 mm,
significantly improves the process of preparation.
The big 7 liter pulp container
lets you squeeze a lot of juice without interruption. When
the pulp container fills up, just remove it and empty it without a need to disassemble the
device.
The lid of the juice extractor is held by the
locking arm
with housing
, which allows
– if the device is correctly
assembled
– to close the motor circuit thanks to the
integrated
safety switch.
Only then it is possible to switch
the device on. The safety switch immediately stops the
motor, when the locking arm with housing is released.
The device is equipped with the
overheating protection
. When the device overheats
from being used for too long or from being overloaded, it is switched off automatically,
and after cooling off (ca. 15 minutes) it is switches on again.
