- 33 -
CAUTION!
The device may operate only when all the elements have been correctly
assembled and the locking arm has been interlocked with the safety switch
on the lid.
5.2 Installation
Positioning
Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.
Never
place the device at the edge of a table to avoid tilting or falling.
The operating surface must be easily accessible and large enough. In order to assure
comfortable operation and proper air circulation leave at least 15 cm of space on the
sides and back and 50 cm on the front and top from the walls, cabinets, etc.
Never
put the device in a moist or wet area.
Never
place the device on an inflammable surface.
Do
not
place the device near open flame, electric heaters or other heat source.
Place the device so that the plug is easily accessible so as to quickly disconneet the
device if the need arises.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
