- 32 -
➌
➍
Place the adapter ring (
12
) at the rim of
the juice bowl (
14
).
Remember to position the pulp spout at
the opposite side of the juice extraction
nozzle with the closure (
13
).
Tilt the sieve (
10
) position it above the
juice bowl (
14
) and place it on the motor
drive (
8
) by turning slightly to interlock the
pin at the motor base with the groove at
the bottom of the sieve (
10
).
➎
➏
Then, place the lid (
6
) and remember
to properly interlock the protrusions in
the lid (
6
) with the grooves in the
adapter ring (
12
).
Place the feed chute tray (
11
) on the feed
chute (
5
). Position the pulp container (
1
)
below the lid (
6
). For easy cleaning, line
the pulp container with the plastic bag.
➐
Finally, push the locking arm with housing (
2
) above the lid (
6
) until they click.
As a result, the connection with the safety switch is established.