Bartscher E500 LPR, Инструкция по эксплуатации

Страница: 18 / 32

- 38 -
5.2 Positioning and levelling
CAUTION!
Before the device’s installation, carefully check the conditions of the place in
which the device is to be placed to exclude any subsequent damages which
may appear during operation.

Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.

Never place the device on an inflammable surface.

Do not place the device near open flame, electric heaters or other heat source.

Never put the device in a moist or wet area.

Place the device so that the plug is easily accessible so as to quickly disconneet the
device if the need arises.

Before the first use, remove the protective foil from the device. Remove the foil
slowly not to leave glue residues. Remove possible glue residues with appropriate
solvent.
CAUTION!
Never remove the nameplate and warning signs from the device.
The device is equipped with height-adjustable feet.
The desired height can be achieved by rotating the
feet.
Correct levelling is necessary to ensure optimum
performance of the device.
Bearing capacity of the floor on which the device is
placed must be sufficient for the weight of the device.
Fig. 8