Bartscher E500 LPR, Инструкция по эксплуатации, Страница: 26 / 32

- 46 -
Dishes are dried by evaporation. Remove dishes from the basket only with clean hands.
Makes sure not to burn your hands, because the dishes are still hot.
6.1.7 Draining the device
The devices is equipped with the drain pump. Perform the following steps to drain the
device with the use of a drain pump:
- Remove the overflow.
- Using the control knob select the drain function (G) (Fig. 9, page 43).
- Close the dishwasher door and press the START button (D) (Fig. 9, page 43)
to start the cycle; the draining process starts automatically.
-
When the draining process ends (duration ca. 160 seconds), the device may
be switched off.
NOTE!
To ensure that the draining process proceeds correctly with the use of a drain
pump, the drain hose must be located at the appropriate height (not higher
than 800 mm).
6.1.8 Turning the device off
To switch the device off, turn the control knob to OFF
“0“
position.
Do not switch the device off during the washing process, because the dishes inside the
dishwasher will not be washed properly.
6.1.9 Cleaning at the end of the working day
At the end of the working day, thoroughly clean filters, wash arms, rinse arms, as well as
other accessories.
Thorough cleaning is the most important condition for maintaining long service life of the
device. Proper cleaning and disinfection of the dishwasher is the prerequisite for effective
washing of dishes.