Bartscher E500 LPR Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 32

Bartscher E500 LPR Скачать руководство пользователя страница 19

- 39 -

5.3 Electrical connection

DANGER! Electric shock hazard!

Incorrect installation of the device may cause injury!
Before the installation, compare current parameters of the
local power grid with the device’s power supply parameters
(see the rating plate). Connect the device only if the above
mentioned parameters are consistent with each other!



The device can be connected to the power supply only by a certified professional

installer, while taking into account the applicable standards in the country of
installation.



The device is ready for installation and equipped with a power cord of 1.3 m in length.



A multipolar switch with at least 3 mm opening should be connected near the device,

and should be easily accessible.  This device is designed for switching the device off
in case of installation, repair, cleaning or maintenance work conducted on the device.
This switch must be equipped with fuses adjusted for the rated voltage of the device.
A properly selected magnetic thermal switch may be an alternative to the above
mentioned switch.



The device must be properly connected to the equipotential bonding circuit. The

manufacturer shall not be liable for any damages caused by failure to meet this
obligation.



The power supply circuit with the socket must be protected by the fuse of at least

16A. Connect the device only to the single wall socket with ground contact; do not
use any extension cords or power strips.

CAUTION!

The manufacturer shall not be liable for any personal injury or device damage in
case of failure to comply with provided factory specifications or incorrect
installation.

«
...
17
18
19
20
21
...
»

Содержание E500 LPR

































Отзывы:

Нет отзывов