Bartscher E500 LPR, Инструкция по эксплуатации, Страница: 30 / 32

- 50 -
Problem Possible reason Solution
Washing results
are not
satisfactory.
Foaming.
Inappropriate cleaning
agent.
Contact the service company
for help to select correct
cleaning.
Temperature in the wash-
tank is below 50 °C.
Thermostat failure or
thermostat is not set
correctly. Contact the
service company to request
the repair.
Washing cycle is too short for
the heavily soiled dishes. Select a longer washing
cycle.
Washing water is very dirty.
Drain the wash-tank and fill
in with clean water.
Dishes (pots, pans,
etc.) are not properly
dried.
No rinse aid
Add the liquid rinse aid to
the tank.
Not enough liquid rinse aid
Contact the service
company to repair the rinse
aid dosing pump.
Dishes stayed too long in the
dishwasher.
Remove the dishes from
the dishwasher
immediately after the
completed washing cycle
and leave them for drying
in the air.
Rinsing temperature is below
80 °C.
Contact the service
company to fix the
problem.
Streaks and spots on
dishes.
Too much rinse aid.
Contact the service
company to request setting
of the rinse air dosing pump.
Too hard water.
Check the hardness of water
and if possible immediately
run the regenerative cycle.