Bartscher E500 LPR, Инструкция по эксплуатации

Страница: 25 / 32

- 45 -
NOTE!
After a longer break in the device operation, during the first heating process
on a given day, values of temperatures for the device may exceed the
previously provided values, which is quite normal. However, if during the
heating process the water vapour is coming out of the rinse arm nozzle,
please contact the technical service.
6.1.4 Preparation of dishes
Dishes to be washed must be prepared in the following way:
- Before placing the dishes in the basket, remove bigger food
remains from the dishes.
-
Wash glasses first.
-
Always place glasses face down.
-
Place the plates in plate holders in the dishwasher basket.
-
Place the cutlery in the cutlery holder with handles facing down. Cutlery of
various sized should be mixed.
- Insert the cutlery holders to the basic dishwasher baskets.
When filling the dishwasher baskets pay attention to the following:
Max. glass height: 280 mm, max. plate height: 320 mm
6.1.5 Starting the washing process
Before starting the washing process, slide the appropriate basket with dishes into the
devi
ce. To start the washing process, turn the control knob to “
F
“ position, Fig. 9,
page 43 (120 sec washing cycle).
Close the door of the device and to start the washing cycle press the START button (D).
6.1.6 Interrupting and finishing the washing process
The washing process may be interrupted in one of the following two ways:
-
Switch the device off (turn the control knob to OFF “ 0“
position)
→
The washing
process is fully interrupted.
- Open the device door
→
the washing process is interrupted; in order to
continue the washing process close the door and press the START button.
After finishing the washing process, the basket with dishes may be removed.