Bartscher E500 LPR Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 32

Bartscher E500 LPR Скачать руководство пользователя страница 22

- 42 -

CAUTION!

A selection of the cleaning agent and setting of the cleaning agent dosing
pump should be entrusted to the qualified technician who has experience with
chemical products, to achieve the most efficient washing effects.

5.7 Rinse aid dosing pump

The device is equipped with the rinse aid dosing pump. Thanks to this dosing device,
the appropriate quantity of rinse aid is added to the wash-tank each time.

Operation:

Thanks to this dosing device, the liquid rinse aid is absorbed as soon as the

programmer issues a command for rinsing. A SEPARATE TANK is filled with liquid rinse
aid which is then mixed with rinsing water flowing from the boiler.

Setting:

this dosing device should be set up during the installation, because only this

way the user may use all washing features in an optimum way from the very beginning.
The setting must be properly adjusted depending on the selected rinse aid and
hardness of the available water.

CAUTION!

A selection of the rinse aid and setting of the rinse aid dosing pump should be
entrusted to the qualified technician who has experience with chemical
products, to achieve the most efficient washing effects.

«
...
20
21
22
23
24
...
»

Содержание E500 LPR

































Отзывы:

Нет отзывов