- 57 -
6. Cleaning and maintenance
WARNING!
Before cleaning set the gas control knobs in “0” position
and close the main gas valve.
Set the temperature control knob in “0” position and
disconnect the device from the power supply (pull the
plug from the socket!).
Leave the device to cool down completely.
Never use water jet to wash the device.
Make sure that no water gets into the device.
Cleaning
o
For best results and hygiene, clean the device every day when finished using the
device.
Gas cooking surface
o
Remove the grills and gas burner shields.
o
Clean the cooking surface using a soft cloth or sponge with warm water. A mild
cleaning agent (e.g. washing-up liquid) can be used if needed. Next, dry the
cooking surface.
o
The grills and gas burner shields can be cleaned with a soft cloth or sponge and
a mild cleaning agent (e.g. washing-up liquid). A brass-wire brush can be used
for tough dirt or grease. Rinse the grills and gas burner shields thoroughly with
clean water, then dry.
o
After cleaning the grills and burner shields, replace them before igniting a burner.
Multifunction oven
o
Thoroughly clean the inside of the oven and shelf guides with a soft cloth or sponge,
warm water and a cleaning agent appropriate for enamel surfaces. Rinse thoroughly
with warm water and ensure that no leftover cleaning agent remains. Next, dry the
inside of the oven and guides for shelves.
o
Do not use abrasive scouring pads or other products that may damage the enamel
in the oven.
