- 49 -
When changing the jets, observe the following instructions:
1.
Grill
2.
Burner shield
3.
Burner
4.
Thermal element
5.
Safety valve
remove the grill from the cooking
surface;
remove the burner shield from the
burner;
remove the jet using a 7 mm wrench;
replace the removed jet with one appropriate for the type of gas to be used (see
information in the
"Jet and burner properties"
table on pp. 44-45;
mount the burner and replace the burner shield over it;
Adapt all burners according to the above instructions;
When finished, replace the grills on the cooking surface;
5.1.6 Regulating low flame
After adaptation for another gas type, the low flame setting must be recalibrated
for each burner.
Perform the recalibration as follows:
ignite the burner;
turn the dial counter-clockwise to the
lowest flame setting (small flame symbol);
remove the regulation dial from
the valve.
