Bartscher 101.926, Инструкция по эксплуатации

Страница: 30 / 92

- 30 -
Safety features
•
For the user’s safety, the speed regulator dial should be in the „OFF” position prior
to attaching the mixing bowl, protective cover, attachments or other additional
accessories.
•
The unit is also equipped with a protective mixing bowl cover which blocks the
unit electrically to ensure that it begins working only when the cover is properly
mounted and the mixing bowl is in the highest position.
•
To ensure additional safety, the unit possesses a breaker switch. In the event a
power outage occurs, the unit can be turned on again by turning the ON/OFF/ speed
regulator dial. This ensures that the unit will not turn itself on after power has been
restored.
•
In the event the unit begins to overheat, the overheating protection mechanism will
activate and the unit will automatically shut it self off. If this occurs, place the speed
regulator dial in the „OFF“ position, and reduce the amount of dough.
•
After 10 - 15 minutes the unit can be turned on again using the speed regulator dial (by
selecting the desired speed from 1 to 10).
•
If the unit stops working again, reduce the amount of dough.
•
If the following occurs when only a small amount of dough is present, contact the
nearest service center for assistance.
WARNING! Danger of injury caused by moving parts!
Mount attachments only when the power is turned off – when the unit is turned
off, the power continues to flow for a short period.
Mounting and removal of attachments while the motor is activated may cause
injury to fingers and hands.
Place the speed regulator dial in the „OFF“ position to mount and remove
attachments, and remove the unit’s plug from its socket.
5.2 Installation and connection
•
Discard the complete packing material after unpacking the device.
•
Place the unit on a flat, safe surface capable of holding the unit’s weight (min. 25 kg).
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.