Bartscher 101.926, Инструкция по эксплуатации

Страница: 31 / 92

- 31 -
•
Leave enough space around the unit to use it properly and for mounting and
removing the mixing bowl and attachments.
Do not block the ventilation ducts at the rear of the unit as this may lead to its
overheating.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
5.3 Operating
Before first use
•
Before first use, thoroughly wash the mixing bowl, protective cover and attachments for
mixing and whipping (flat beater, whisks, dough hook, dough scraper) with hot water and
a mild cleaning agent.
•
Rinse thoroughly under running water, then dry.
•
Before whipping whites or whole eggs, repeat the above process for washing the
unit.
Mounting the mixing bowl
The mixing bowl handle must be lowered, and the speed regulatordial in the „OFF”
position.
Place the desired attachment in the mixing bowl and place
the bowl on the handle.
There are three points for mounting the mixing bowl:
a) The locking bolt (pin) at the rear of the bowl is
inserted into the appropriate opening in the bowl
handle;
b) Both pins must lock in place;
c) The safety lever must be closed at the right and
left sides.
ATTENTION!
Before closing and pressing the safety lever, ensure that the bowl has been
properly mounted!