Bartec MAK TIGER 3003, Руководство по обслуживанию

Страница: 23 / 216

Compact Controller TIGER Type 6942-10 Serie C
15
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
4.6.1
Power supply
Attention:
Shielded 2.5 mm² cable (16 A fuse, earth and positive branch) is required for the
24 V power supply, including corresponding switch
The solenoid valves, all the measuring sensors and the ticket printer are
supplied by the Controller (see general diagram on page 47).
4.6.2
Inputs
The inputs are user-configurable. The following assignment is recom-
mended:
log. inv.
Quiescent
state
Designation Function
1 n L MS1 Milk temperature intake
2 n L MS2 Vacuum tank overflow sensor
3 n L MS3 Milk sensor inlet/discharge vacuum tank
4 n L MS4 Milk sensor transfer pumping
5 n L Standby operation on
22 n L Group signal overfill monitor
51 n L Start button (optional)
52 n L Stop button (optional)
4.6.3
Outputs
The outputs are user-configurable. The following assignment is recom-
mended:
log. inv.
Valve
designation
Function
Pos. in
valve
terminal
1 1 Ejector Compressed air ejector MV1
2 2 Air intake Air for drainage, moving to level MV2
3 3 V3 Ejector intake stop valve 1
4 4 V4 Restrictor valve (open in home position) 2
5 5 V5 Ejector outlet stop valve 3
6 6 V6 Vacuum tank stop valve 4
7 7 V7 Intake valve 5
8 8 V8 Pump stop valve 6
9 9 V9 Vacuum tank inlet cleaning valve 7
10 10 V10 Discharge cleaning valve 8
11 11 V11 Inlet transfer pumping valve 9
12 12 V12 Discharge transfer pumping valve (optional) 10
13 13 V13 Unmeasured transfer pump valve (optional)
14 14 V14 Transfer pumping stop valve (optional) 11
15 15 V15 Vacuum restrictor 12