Bartec MAK TIGER 3003, Руководство по обслуживанию

Страница: 53 / 216

Measuring system MAK TIGER 3003
45
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
5.18
Mounting of rotation sensor to
rotary pump

Install the proximity switch before the pump inlet is closed as afterwards
the pump can only be turned by hand.

Turn the knob of the rotary encoder disk in front of the desired mounting
opening and screw in the proximity switch to the stop.

Then turn it back by approx. 0.75 to maximally 1 rotation and lock it with
both nuts.

If there is no signal, screw the proximity switch in again with a quarter turn.
Attention:
Non-observance of these mounting instructions can result in the destruction of the
proximity switch.
Cap (possible mount-
ing places)
Disk of rotary encoder
Bottom opening must be open
Locking nuts
Proximity switch
Mount preferably in the
direction of the rear wall