Bartec MAK 3003, Руководство пользователя

Страница: 15 / 26

Menu
11
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
4.2
Diagnostic
In the diagnosis menu, the motors can be started for a short time to test them.
In addition, the current status of the inputs and outputs and the values of the
voltage and power inputs (for FLM) are displayed
Diagnostics:
Run Motor 1 The sampling motor 1 will start for a few seconds
Run Motor 2 The sampling motor 2 will start for a few seconds
Inputs/Outputs
By selecting the outputs, you can switch between „0“ and „1“ and set or reset the
output. For the remaining values, only the current statuses are displayed.
INPUTS/OUTPUTS
Input 1
0
Input 2 0
Output 1 0
Output 2 0
Milk sensor 0
Temperature 00.0
Voltage input 0052
Current input 0023
0
≙
ON
1
≙
OFF