Bartec MAK 3003, Руководство пользователя

Страница: 18 / 26

Menu
14
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
4.3.3
Outputs
Outputs in the Ultrasampler EASI
The assignment of the outputs can be freely configured, the following alloca-
tion is recommended:
No. log. No. Resting state Designation Function
1 1 L Enable pump
2 2 L Status signal cleaning running
Logical allocation
≙
Software allocation of inputs
The output voltage is unstabilized, EMC technically protected against the ve-
hicle power supply voltage to ensure to all control tasks. Therefore, connec-
tions to other potentials (e.g. chassis ground reference or reverse voltages in
the plus branch) are always galvanically decoupled (e.g. with additional relay,
if necessary).
4.3.4
Inputs
Inputs in the Ultrasampler EASI
The assignment of the inputs can be freely configured, the following allocation
is recommended:
No. log. No. Resting state Designation Function
1 1 low: positive switching External switch for start/stop
2 2 low: positive switching Status signal pump is running
Logical allocation
≙
Software allocation of outputs
Resting state
≙ negative- or positive switching