Bartec MAK 3003, Руководство пользователя

Страница: 12 / 26

Basics
8
MAK 3003 EASI Ultrasampler Controller Type 6970-31, Configuration, Software version EASI 1.00, SAK 200311
3.2.1.2 Editing parameters
1.
Use the „EASI Wheel“ to select the desired parameter from the displayed
list that you want to accept. The selected parameter is marked by a bright
bar.
2.
The currently selected parameter is accepted by pressing the „EASI
Wheel“ or pressing the green button.
Numerical entries
Numerical entries are entered using the „EASI Wheel“.
The displayed values can be increased or decreased by turning to the left or
right.
By pressing the key you can switch to the next position in the input field.