Baroness TDA1200, Руководство по обслуживанию

Страница: 73 / 89

Important
When assembling, remove the old packing
and wipe out all of the old liquid gasket and
then attach a new packing.
Important
Oil seal, spring pin, O-ring and seal washer
should always be replaced with new ones.
Have new bearings and oil seals ready with
a profuse amount of the gear oil applied.
Apply a profuse amount of the gear oil to
the lip of the oil seal.
1
2
1lbr3a-008
Inspection of gear box_032
1 Bearing
2 Oil seal
When driving in the oil seal, apply the liquid
gasket (equivalent to ThreeBond 1104) on
the outer surface.
1
2
5s6or7-016
Inspection of gear box_033
1 Oil seal
2 Liquid gasket (ThreeBond 1104)
29.
30.
In the hole on the gearbox cover where the
shifter fork goes through, please replace
the O-ring with a new one.
1
5s6or7-061
Inspection of gear box_034
1 O-ring
Attach 2 both-end round keys to each side
of the drive shaft C.
1
2 2
5s6or7-062
Inspection of gear box_035
1 Drive shaft C
2 Both-end round key
31.
32.
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-51
Inspection and repair of each section