Baroness TDA1200, Руководство по обслуживанию

Страница: 55 / 89

1 Collar
2 Bolt
3 Tine holder
4 Tine holder A
Install the tine holder B onto the arm axis
and the bolt, and then drive the tine holder
B horizontally by using a driver tool.
2
1
iiprkx-021
TDA1600_021
1 Tine holder B
2 Bolt
Important
Install the bearing collars with taking care of
their correct directions.
Install the bearing collar onto 2 arm axes.
Install the washer and U nut onto the bolt.
UP
4
1
1
2
3
2
iiprkx-022
TDA1600_022
1 Bearing collar
2 Arm axis
3 Washer, U nut
4 Top view of bearing collar
26.
27.
28.
Install the lower arm.
1
iiprkx-023
TDA1600_023
1 Lower arm
Install the washers and U nuts onto 2 arm
axes of the lower arm.
Install the washer and U nut onto the bolt
A which holds the tine holder.
Important
There are 4 types of upper arms and they
have their own places of installation and
directions.
(See "Crank timing diagram" (Page 4-2) .)
Install the upper arm by using the bolt B,
washer, and U nut.
Fasten all U nuts on their specified torque.
2
4
1
5
6
3
iiprkx-024
TDA1600_024
1 Arm axis, washer, and U nut
2 Lower arm
3 Bolt A, washer, and U nut
4 Tine holder
5 Upper arm
6 Bolt B, washer, and U nut
29.
30.
31.
32.
33.
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-33
Inspection and repair of each section