Baroness TDA1200, Руководство по обслуживанию

Страница: 50 / 89

Important
Install the bearing collars with taking care of
their correct directions.
Insert the bearing colors into the lower
housing A, lower housing B and tine
holder.
UP
2
1
lyl9n4-012
TDA1200_012
1 Bearing collar
2 Top view of bearing collar
Install the lower arm from the above.
1
lyl9n4-013
TDA1200_013
1 Lower arm
Tighten the arm axies by using a disc
spring and U nut.
1
2
lyl9n4-014
TDA1200_014
16.
17.
18.
1 Disc spring
2 U nut
Important
There are 3 types of upper arms and they
have their own places of installation and
direcitons. (See "Crank timing diagram" (Page
4-2) .)
Install the upper arm onto the lower
housing A by using the bolt, washer and U
nut.
3
2
1
lyl9n4-015
TDA1200_015
1 Bolt, washer, and U nut
2 Upper arm
3 Lower housing A
TDA1600
Wear of bearings due to frequent usage and
invasion of water may damage bearings,
etc., preventing smooth rotation of the tine
holder, lower housing A, lower housing B,
etc. Inspect and replace the parts such as
the springs.
Make sure that the tine holder or housing
does not have any chap or crack.
Make sure that there is no wear or rust of
the bearing.
Make sure that there is no play in the fit of
the shaft and the bearing.
Make sure that there is no bent, crack or
break on the upper arm.
Make sure that there is no bent, crack or
break on the lower arm.
Make sure that there is no bent or wear on
the arm axis.
Remove the bolts, washers and U nut A
from the lower housing Assy, and then
remove the upper arm.
19.
￭
･
･
･
･
･
･
1.
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-28
Inspection and repair of each section