Baroness TDA1200, Руководство по обслуживанию

Страница: 65 / 89

Remove the stop ring from the crank
housing.
3
2
1
t9b58o-001
Inspection of crank housing_001
1 Crank housing
2 Stop ring
3 Bearing
Place the crank housing turned upside-
down on the vise to provide a space for the
bearing to come out.
Remove the drive shaft by striking it with a
wooden hummer to prevent any damage on
the shaft.
2
1
t9b58o-002
Inspection of crank housing_002
1 Vise
2 Drive shaft
Place the drive shaft on the vise to provide
a space for the shaft to come out.
2.
3.
4.
5.
Remove the drive shaft by striking it with a
wooden hummer to prevent any damage on
the shaft.
1
2
t9b58o-003
Inspection of crank housing_003
1 Bearing
2 Drive shaft
Important
Be sure to replace the bearing with new one.
For installation, reverse the removing
procedure.
Note:
When driving in the bearing, use a bearing
driver.
6.
Operating Machine and Mower Units
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-43
Inspection and repair of each section