Baroness TDA1200, Руководство по обслуживанию

Страница: 58 / 89

Confirm that there is no abnormality in the
spring shaft, compression spring, fastening
bracket, and spring stopper.
5
6
3 4
2
1
pue9kj-010
Inspection of spring box_010
1 Spring shaft B
2 Compression spring
3 O-ring
4 Fastening bracket
5 Spring stopper
6 Spiral pin
Remove the urethane sheet from the spring
box.
2
1
pue9kj-011
Inspection of spring box_011
1 Spring box
2 Urethane sheet
11.
12.
Confirm that there is no abnormality in the
spring box, hollow set, spring washer, nor
nut.
Note:
Replace the urethane sheet with a new
one.
2
3
1
pue9kj-012
Inspection of spring box_012
1 Spring box
2 Hollow set, spring washer, and nut
3 Urethane sheet
Caution
"Tightening torques" (Page 3-4) See the list.
Note that the Baroness product warranty may
not apply to any defects caused by incorrect
or overtorque tightening, etc.
Important
Be sure to replace the bearings, spiral pins,
O-rings, and urethane sheets with new ones.
Insert the spring shaft into the vise.
Install the O-ring to the fastening bracket,
apply grease on the inner surface of the
fastening bracket, and insert it into the
spring shaft.
Insert the compression spring.
13.
14.
15.
16.
TDA1200
・
TDA1600
Operating Machine and Mower Units
Page 4-36
Inspection and repair of each section