Baroness LM315GC, Руководство по эксплуатации для владельца, Страница: 26 / 86

Inspection Before Use
Be sure to perform an inspection before you
start using the machine so that you will be able
to take advantage of its optimum performance
for a long period of time.
Reel Cutter (Cutting Cylinder) and Bed
Knife (Bottom Blade)
Inspection of Reel Cutter (Cutting Cylinder) and
Bed Knife (Bottom Blade)
The reel cutter (cutting cylinder) and bed knife
(bottom blade) may become dull due to
frequent use, objects crushed during mowing,
or damage caused during transportation.
Inspect the reel cutter (cutting cylinder) and
bed knife (bottom blade), and if necessary,
adjust the blade engagement, perform back
lapping, or resharpen or replace the reel
cutter (cutting cylinder) and the bed knife
(bottom blade).
Check to see whether or not the edge of
the reel cutter (cutting cylinder) and the bed
knife (bottom blade) are too blunt to cut.
Make sure that the reel cutter (cutting
cylinder) and the bed knife (bottom blade)
are not cracked.
Check to see how much the reel cutter
(cutting cylinder) and the bed knife (bottom
blade) are worn.
Make sure that the reel cutter (cutting
cylinder) and the bed knife (bottom blade)
have not changed color due to heat from
grinding.
Check to see whether or not the second
edge face remains at the point of reel cutter
(cutting cylinder).
Make sure that the welding between the
reel cutter (cutting cylinder) and the disc
has not come off.
Hydraulic Oil
Inspection of Hydraulic Oil
Raise the mower units and maintain that
position on a level surface.
1.
2.
3.
4.
5.
6.
1.
Make sure that the oil level is at the middle
of the oil gauge.
1
olekci-005
Inspection of Hydraulic Oil_001
1 Oil gauge
Check underneath the machine for oil
leakage.
Hydraulic Oil Supply
Important
Do not mix different types of oil.
Important
Use Shell Tellus S2M46 (or equivalent) as
hydraulic oil.
If the oil level is low, open the tank cap and
supply oil until the oil level reaches the
middle of the oil gauge on the hydraulic
tank.
1
2
dmhzyz-009
Hydraulic Oil Supply_001
1 Tank cap
2 Oil gauge
Tighten the tank cap securely.
Start the engine, raise and lower the mower
units, and turn the steering wheel left and
right.
2.
3.
1.
2.
3.
LM315GC
Handling Instructions
Page 4-2
Inspection Before Use