![background image](http://html1.mh-extra.com/html/barco/retro-graphics-2100/retro-graphics-2100_owners-manual_3826187006.webp)
1-1
Unpacking & Dimensions
5975187 BARCOGRAPHICS 2100 200597
1
Pull
To open
1
2
3
4
5
641.5
405
191.5
63
33
5
22
4
14
1
55
35
14
1
.2
20
25
0
22
0
278
127
5
194.9
603
225
245
67.5
UNPACKING & DIMENSIONS
Unpacking
To open the banding, pull on the clip as shown in the first drawing.
Take the projector out of its shipping carton and place it on a table.
For transportation, the projector is mounted on a wooden board with 3 bolts (M5). Use a 8 mm wrench to remove these bolts.
When using the projector as a table mounted configuration, always mount the 3 plastic supporting feet by turning in into the provided holes
(see drawing on next page).
Save the original shipping carton and packing material, they will come in handy if you ever have to ship your projector. For maximum protection,
repack your projector as it was originally packed at the factory.
Contents of the shipped box :
- 1 remote control unit RCU + 9V battery
- 1 owners manual.
- 1 installation manual.
- 3 plastic supporting feet.
- 2 supporting feet extensions for 100% off-axis projection.
- 1 BARCOGRAPHICS 2100
- 1 power cable with outlet plug type CEE7.