Start Up of the Adjustment Mode
7-1
5975187 BARCOGRAPHICS 2100 190898
7
START UP OF THE ADJUSTMENT MODE
Adjustment Mode
All source set ups, picture tunings and geometry are made while in
the 'Adjustment mode' . Press the
ADJUST
or
ENTER
key to enter the
'Adjustment mode'.
You are now in the 'Adjustment mode'. The control disk (RCU) or '+
or '-' keys (local keypad) are used to make menu selections and also
for adjustments. The
ENTER
and
EXIT
keys are used to move forward
and backward through the menu structure. The
ADJUST
key can be
used to terminate the adjustment mode while any path selection menu
is displayed.
There are 4 possible paths to follow once in the Adjustment mode.
They are :
Installation
- Installation should be selected when the projector is
relocated in a new configuration.
Random Access
- Random Access should be selected if the user
is used to set up a source.
Service
- Service should be selected if the user intends to change
general settings such as password, language, address, etc. or some
service actions as reset lamp run time, etc. or get set-up information.
Some items in the Adjustment mode are password protected. While
selecting such an item, the projector asks to enter your password
(Password protection is only available when the password strap on
the controller module is ON, see 'Change password' in chapter
'Service mode'.
Your password contains 4 digits.
Enter the digits with the numeric keys.
Example : 2 3 1 9
The first digit position is highlighted. Enter with the numeric keys. The
highlighted square jumps to the next position. Continue until all 4 digits
are filled in.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
ENTER PASSWORD
----
Use numeric keys
<EXIT> to return
PASSWORD
Error
Invalid password
<EXIT> to return
When your password is correct, you gain access to the selected
item.
When your password is wrong. The error message "Invalid pass-
word" is displayed on the screen. Press
ENTER
to continue and to
return to the Service menu.
Factory programmed password :
0 0 0 0
Once the password is correctly entered, all other password pro-
tected items are accessible without re-entering your password.
When re-entering the Adjustment mode, it will be nessary to enter
your password again when selecting a password protected item.
