Installation Guidelines
2-3
5975187 BARCOGRAPHICS 2100 200597
To install the projector
100% off-axis, consult
a qualified service tech-
nician.
* How to install a projection lens?
The projector is supplied without any lens. The following lenses are
available as an option (order numbers are given in appendix B) :
SD(1.2:1) - Video
SD(1.2:1)
SD(1.7:1)
SD(1.6-1.9:1)
SD(0.8:1)
How to install the lens?
Remove the foam rubber in the opening of the lens holder.
- Take the new lens out of its shipping carton and remove the lens
covers.
- Turn the lens into the lens holder by turning clockwise.
- Focus the lens (see appendix B, 'Focusing the lens') and secure
the
correct position with the fastener ring by turning
this ring clockwise.
* How to install the projector?
Ceiling mount or table mount?
To install the BARCOGRAPHICS 2100, it is recommended using the
BARCO mounting kits which are specially designed for this function.
BARCO ceiling support CM50 for LCD projectors.
CM50 with pulley system, Order number : R9829610.
CM50 without pulley system, Order number : R9829611.
Note : The CM50 in combination with the adapter plate can
only be used for 70 % OFF-AXIS projection.
Always use the BARCO ceiling support to attach your
BARCOGRAPHICS 2100 to the ceiling.
The installation instruction for this support is enclosed in the packet
of the set.
When using the adapter plate and the CM50 to mount the
BARCOGRAPHICS 2100 to the ceiling, only 70% off-axis projection
is possible.
BARCO projection table.
BARCO's projection table provides adjustable height and offers a
stable surface for the projector
Order number R9827740.
Screen
PD
B
Floor
Projector
CD
A
CD = B - A
CD = height of table + supporting feet
SH
SH
SW
SIDE VIEW
BACK VIEW
Screen
BOTTOM VIEW
SW
Floor
