![background image](http://html1.mh-extra.com/html/barco/retro-graphics-2100/retro-graphics-2100_owners-manual_3826187011.webp)
Installation Set Up
3-1
5975187 BARCOGRAPHICS 2100 190898
3
INSTALLATION SET UP
The projector can be installed to project images in four different
configurations : front/table, front/ceiling, rear/table and rear/ceiling.
To change the Configuration, enter the adjustment mode by pushing
ADJUST
or
ENTER
.
Highlight Installation by pushing the control disk up or down and press
ENTER
to select.
The installation menu will be displayed.
ENTER
displays the Installation menu.
EXIT
returns to operational mode.
Highlight Configuration by pushing the control disk up or down and press
ENTER
to
select. The configuration menu will be displayed.
ENTER
displays the Configuration menu.
EXIT
returns to the path selection menu.
ADJUST
returns to operational mode.
The actual selected configuration will be highlighted.
Push the control disk up or down to select the corresponding configuration with
regard to the projector environment. Press
ENTER
to confirm your selection.
ENTER
to confirm the selection.
EXIT
returns to the installation menu.
ADJUST
returns to operational mode.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
CONFIGURATION
FRONT/TABLE
FRONT/CEILING
REAR/TABLE
REAR/CEILING
INSTALLATION
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
5HDU7DEOH
5HDU&HLOLQJ
)URQW7DEOH
)URQW&HLOLQJ