![background image](http://html1.mh-extra.com/html/barco/retro-graphics-2100/retro-graphics-2100_owners-manual_3826187039.webp)
10-4
Service Mode
5975187 BARCOGRAPHICS 2100 180898
Select with or
then <ENTER>
<EXIT> to return.
Change Baudrate PC
The communication speed between projector and computer, e.g. PC
or MAC, has 8 possible speeds. The baud rate speed can be
software set up.
Highlight Change Baud rate PC by pushing the control disk up or down
and press
ENTER
to display the Change Baudrate PC menu.
The following baud rates are available :
- 9600
- 4800
- 2400
- 1200
- 600
- 300
- 150
- 75
The actual baud rate will be highlighted. To change the baud rate,
push the control stick forward or backward and press
ENTER
to
accept the new baud rate setting.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
MORE...
Select with
ê
or
é
<ENTER> to accept
<EXIT> to return.
CHANGE BAUDRATE PC
9600
4800
2400
1200
600
300
150
75
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
MORE
WARNING
-----------------------------------------------------
RISK OF
ELECTRICAL SHOCK
______________________________________________________________
RESET LAMP RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Reset Lamp Runtime
Reset lamp run time is only allowed when a new lamp is installed.
Highlight Reset Lamp Run Time by pushing the control disk up or down
and press
ENTER
to select.
When Reset Lamp Run Time is selected in the Service Mode selection
menu, the following warning will be displayed :
"Risk of electrical shock. Reset lamp run time is reserved to qualified
service personnel."
If you are not qualified, press
EXIT
to cancel the reset operation.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
DIMMING
MORE...
LAMP RUNTIME HISTORY
Serial No
Runtime
-----------------------------------------------------
>
0111121
600 h
0110031
980 h
0110010
1000 h
-----------------------------------------------------
<EXIT> to return
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp Run
Time History by pushing the control disk up or down and press
ENTER
.
A listing with the lamp serial number and the corresponding run time
will be displayed.
The actual installed lamp will be marked.
Press
EXIT
to return to the service mode selection menu.