Random Access Adjustment Mode
8-9
5975187 BARCOGRAPHICS 2100 180898
Geometry
Highlight Geometry by pushing the control disk up or down and press
ENTER
to select the geometry selection menu.
The following adjustment are possible :
- Horizontal and vertical image shift.
- Horizontal and vertical image size
- Side keystone (only necessary if the projector is mounted under
a non standard projection angle).
- Blanking
- Options
The following ways are possible to adjust a geometry function :
- Using the control disk to adjust or
- Entering the value with the digit keys. Therefore, press
ENTER
to
select the indicated value and enter the desired value with the digit
keys. Press
ENTER
to confirm the entered value.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Shift
Highlight Shift by pushing the control stick forward or backward and
press
ENTER
.
The image can be shifted in a horizontal or vertical direction. Push
the control disk up or down to shift the image in a vertical direction.
Push the control stick to the right or to the left to shift the image in a
horizontal direction. The default value for the shift is 0.
Shifting in a vertical direction : when the shift value is positive, the
image is shifted upwards, when the value is negative, the image is
shifted downwards.
Shifting in a horizontal direction : when the shift value is positive, the
image is shifted to the right, when the value is negative, the image is
shifted to the left.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
AUDIO TUNING
GEOMETRY
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Example for table mount configuration
Size
Highlight Size by pushing the control disk up or down and press
ENTER
to select.
The size can be adjusted in a vertical or horizontal way.
When adjusting the vertical size, for table mount configuration ; the
upper side of the image is fixed and only the lower side can be moved
to its exact position and for ceiling mount configuration ; the lower side
of the image is fixed and only the upper side can be moved to its exact
position.
When adjusting the horizontal size, the left side of the image is fixed
and only the right side can be moved to its exact position.
Hint : Before sizing the image, be sure that :
- For table mount configuration the upper left corner is correctly
positioned on the screen. Use the Shift function to position this
corner.
- For ceiling mount configuration the lower left corner is correctly
positioned on the screen. Use the Shift function to position this
corner.
Horizontal size
adjustment
Vertical size
adjustment
Fixed sides
