Random Access Adjustment Mode
8-10
5975187 BARCOGRAPHICS 2100 180898
Side keystone
Highlight Side Keystone by pushing the control disk up or down and
press
ENTER
to select.
The side keystone adjustment is used to align the image if the projector
is mounted as a non standard projection angle.
Push the control disk to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control disk to the left. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control disk to the right. The number indication below
the bar scale will be positive.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
Blanking
Highlight Blanking by pushing the control disk up or down and press
ENTER
to select.
Blanking adjustments affect only the edges of the projected image
and are used to frame the projected image on to the screen and to
hide or black out unwanted information (or noise). A '0' on the bar
scale indicates no blanking.
The following blanking corrections are possible :
- Top blanking
- Bottom blanking
- Left blanking
- Right blanking
Bottom blanking
Top blanking
Right blanking
Left blanking
